Here are some FAQs for you. When you are using B970b router, you may encouter the following problems, help these solutions help.

What should I do if no networks found in the WLAN mode using B970b?
1.Connect the router using the supplied ethernet cable
2.Make sure that you have turned WLAN on in the Management Interface
3.Make sure that SSID Broadcast is enabled in the Management Interface
Continue reading “Huawei B970B – FAQs” »

, ,

Here are some problems and solutions you may encounter when you use Huawei B970b wireless gatway.

What to do if a PC in the LAN cannot access the Internet?
1. If the power indicator is off, you need to check whether the power adapter is normally connected.
2. If the signal strength indicator is off, you need to check whether the area is covered by the network.
Continue reading “Huawei B970B – Troubleshootings” »

, , ,

You may set up wireless home networks with Huawei B970b rush through the job to get the Internet connectivity working as quickly as possible. That’s totally understandable. It’s also quite risky as numerous security problems can result. Today’s Wi-Fi networking products don’t always help the situation as configuring their security features can be time-consuming and non-intuitive. Let’s view the following security settings you can do for your B970b wireless router.

Click Security. You can configure the advanced security settings.

Continue reading “Huawei B970B – Security Settings” »

, , , ,

Click Advanced Settings in the management page, you can configure both the basic attributes and advanced parameters of the Huawei B970b, and also perform routine maintenance and management to the device. Now, let’us move to the dial-up setting function page.

Click the dial-up icon to access the Dial-up Settings page.

Configuring the PPP Settings
1. Click to access the PPP Settings page.
2. Enter the correct parameters.
Continue reading “Huawei B970B – Dial-up Settings” »

, , , ,

Click Advanced Settings in the management page, you can configure both the basic attributes and advanced parameters of the Huawei B970b, and also perform routine maintenance and management to the device. Now, let’us move to the mobile network setting function page.

Click to access the Mobile Network Settings page.

Continue reading “Huawei B970B – Mobile Network Settings” »

, , ,

Click Advanced Settings in the management page, you can configure both the basic attributes and advanced parameters of the Huawei B970b router, and also perform routine maintenance and management to the device. Now, let’us move to the system management page.

Click the computer icon to access the System page.

Continue reading “Huawei B970B – System Management” »

, , ,

Click Advanced Settings in the management page, you can configure both the basic attributes and advanced parameters of the Huawei B970b 3G router, and also perform routine maintenance and management to the device. Now, let’us move to the SIM setting function page.

Click the SIM icon to access the SIM Settings page.

Continue reading “Huawei B970B – SIM Settings” »

, , , ,

If you use Huawei B970b wireless gateway, please use recommended configurations of the PC are as follows:
• Obtain an IP address automatically.
• Deselect Use a proxy server for your LAN.

Configuring the Network Connection
1. Choose My Network Places > Properties > Local Area Connection.
2. Right-click the Local Area Connection icon and select Properties.
Continue reading “Huawei B970B – Configure Your PC Network” »

, , , ,

The wireless configuration allows your PC to connect to the Huawei B970b device through the wireless network. If you need only the Ethernet to connect your PC, you can skip this part.

Configuration Requirements
• To set up wireless network connection, your PC must be configured with the WLAN adapter that supports the IEEE 802.11 b/g protocol.
Continue reading “Huawei B970B – Wireless Configuration” »

, , , ,

Huawei B970b router is a good 3G HSPA wireless gateway. By default, B970b router dials up to access the Internet as required. You can directly use the network services such as web browsing, and receiving or sending emails.

Logging In to the Management Page

  1. Start the Internet browser and enter the address http://192.168.1.1 in the address bar.
  2. Select a user type, enter the password, and then click Login.
     Admin: This user type is authorized to view and change configurations. The default password is admin
     User: This user type is authorized to view only the basic status information. The default password is user.
    Note: To avoid the configuration conflict, only one user is allowed to log in to the management page at a time.

Continue reading “Huawei B970B – Dial-up Access” »

, , ,